Renovations are dusty even when everyone is careful. Plaster sanding, cutting timber, removing old ceilings and chasing walls for new wiring all create very fine dust that hangs in the air and finds its way into any opening. Ducted systems are particularly exposed. Return grilles and outlets are open to the rooms, and if the system was run at any point during the work, it will have pulled that dust deep into the ducts. The first time you turn it on in the finished space, some of that dust comes straight back out.
We clean the system after the trades have finished and the builder's clean is done, so new dust is not still arriving. Outlets and the return grille are removed and washed, and the ducts and plenum are brushed and extracted under negative pressure. The filter usually takes the brunt of renovation dust and is often replaced. If the work involved the ceiling, we check that outlets and ducts were reconnected properly, because duct runs can be pulled loose when ceilings are opened up.
Older homes in suburbs like Wilston, Grange and Windsor are frequently renovated, and the dust from removing original linings can be heavy. A clean before you move back in makes the fresh rooms feel finished. If you are planning work now, ask us about timing before the trades start. A quick chat about covering outlets and keeping the system off during the dustiest stages can make the clean-out afterwards smaller and more effective.